OnyxStar ONYX-35, multirotor special motor 650W
The OnyxStar ONYX-35 is a high torque brushless motor specifically developed for multirotor aircrafts.
The ONYX-35 is foreseen with long cables (75 cm approx.) and a short shaft in order to perfectly fit on the great majority of frames like MikroKopter, Droidworx, OnyxStar or Aero-Tek.
The short shaft allows this motor to be mounted in a coaxial setup.
A propeller mount of 6 mm is supplied with the ONYX-35.
Thanks to its high torque this motor is capable of driving big propellers with a high level of efficiency.
Our ONYX-35 are delivered with their connectors already soldered on the cables. They are used on large configurations, aimed to lift heavy weights like our OnyxStar or SkyJib airframes.
|No-load speed||650 rpm/V|
|Load current||30 A|
|Propeller mount diameter||6 mm|
|Cable lenght||75 cm (29.53 in)|
|Weight (cables excluded)||173 gr (0.38 lbs)|
|Dimensions (D x H)||38 x 43 mm (1.5 x 1.69 in)|
|Suitable propellers||from 14" to 16"|
|Distance between assembly holes||25 mm (0.98 in)|
|Connectors already soldered|